Medical & Lab Equipment Parts
Silicone and rubber components supplied to medical and laboratory equipment manufacturers — produced to drawing against each project's documented requirements.
Product samples Medical & Lab Equipment Parts
Click any product to view a larger photo with dimensions and compound.
Medical & Lab Equipment PartsMedical-Grade Silicone Component
Medical & Lab Equipment PartsMedical Equipment Rings & Seals
Medical & Lab Equipment PartsCustom Molded Medical Silicone Part
Medical & Lab Equipment PartsCustom Medical Seal
Medical & Lab Equipment PartsLaboratory Equipment Rubber Part
Hamta Polymer supplies silicone and rubber components — rings, seals and custom molded parts — to medical and laboratory equipment manufacturers. We make the component, not the device; material grade, biocompatibility documentation and traceability are defined and reviewed per order.
Hamta Polymer manufactures the silicone and rubber components used inside medical and laboratory equipment — rings, seals and custom molded parts. We are the component maker, not the designer or manufacturer of the finished medical device; the equipment manufacturer must evaluate and decide the part's therapeutic or diagnostic use.
Material selection, biocompatibility requirements, sterilizability and traceability documentation must be defined by the customer before ordering. The "medical grade" designation applies to a finished part only when that specific order's material, process and documentation together cover the governing requirements.
Where Medical & Lab Equipment Parts are used across industries
Laboratory equipment
Chamber rings and connection seals for analytical and lab devices.
Therapeutic equipment (component only, not full device)
Silicone parts for non-invasive bodies or sub-assemblies of therapeutic equipment, to the technical specification declared by the customer.
Quality assurance for Medical & Lab Equipment Parts
Dimensional and hardness control (Shore A)(ASTM D2240)
Visual purity and contamination-free surface inspection
How our Medical & Lab Equipment Parts are produced
- 1
Receipt of the drawing, application class, contact type and the device maker's regulatory requirements
- 2
Review of material grade, traceability documents, sterilization method and supply feasibility
- 3
Definition of contamination control, tolerances and acceptance criterion within the order
- 4
Sample production and evaluation by the equipment manufacturer
- 5
Order execution with agreed documentation and batch-level material traceability maintained
For engineers and technical buyers — product types, the full material matrix and a precise selection guide.
Medical & Lab Equipment Parts types available from Hamta Polymer
Medical-grade silicone component
A molded part from high-purity silicone compound for use in the body or assemblies of therapeutic and laboratory equipment; exact specifications (hardness, color and required compliance certificate) are set per customer order.
Rings & seals for medical/lab equipment
Sanitary silicone or rubber O-rings sealing chambers, covers and connections of therapeutic and laboratory devices.
Full engineering material matrix for Medical & Lab Equipment Parts
A compound selection guide based on operating temperature, fluid type and mechanical demand — for industrial orders, match the material to the real service conditions.
| Compound | Operating temperature range | Fluid resistance | Key mechanical property |
|---|---|---|---|
| Silicone (VMQ) | Per the compound datasheet and sterilization method | Air, humidity and steam; grade- and contact-condition dependent | The initial choice for certain medical-equipment parts; requires review of biocompatibility, material traceability and the order's own documentation |
| Sanitary NBR | −40 to +120 °C (general reference) | Oils and common laboratory fluids | For laboratory equipment rings and seals with no direct body contact |
The listed ranges are general material selection guides; final service conditions must be reconciled with the fluid type, pressure, part geometry and order specifications.
How to choose the right Medical & Lab Equipment Parts
To order a part intended for medical equipment, declare precise specifications covering: material, dimensions, contact type and duration, sterilization method, biocompatibility and traceability requirements, and required certificates. Supply feasibility is confirmed after reviewing the compound's documentation and production process. Responsibility for determining regulatory requirements and approving the part inside the final device rests with the equipment manufacturer.
Frequently asked questions about Medical & Lab Equipment Parts
No. Hamta Polymer manufactures only the silicone and rubber components (rings, seals and similar) used inside medical equipment. Designing, manufacturing or assembling complete medical devices is outside this facility's scope of activity.
These documents cannot be generalized across all parts. Before ordering, the compound grade, certificate scope, material batch, production process and the end application's requirements must be reviewed and recorded in the order file.
Medical silicone is typically far stricter on purity, contamination control and certification requirements (such as biocompatibility) than food-grade or industrial grades. For general food and industrial applications, see our Silicone Rubber Parts page →
Yes — development samples are quoted after the material class and documentation requirements are defined, so the prototype already reflects the compliance path of series production.
Silicone VMQ generally tolerates autoclave (steam), ethylene oxide and gamma sterilization, but the exact cycle count and temperature limit depend on the compound. Declare your sterilization protocol and we verify it against the compound datasheet before ordering.
Per the agreed order file: compound batch records, cure-date identification, and the material compliance documents you specify — so every delivered batch links back to its source material.
Other categories
The full rubber and polymer product range
Industrial O-Rings
7 products
Rubber Packing & Gaskets
7 products
Rubber Diaphragms
8 products
Conveyor Rollers
2 products
Shock & Vibration Dampers
8 products
Rubber Strips & Extruded Profiles
6 products
Silicone Rubber Parts
13 products
Flexible Rubber Couplings
4 products
Rubber Dust Boots & Bellows
2 products
Bonded Rubber-Metal Parts
6 products
Miscellaneous Industrial Rubber Parts
10 products
Valve Rubber Components
2 products
Rubber Expansion Joints
1 products
Ready to order Medical & Lab Equipment Parts?
Send us the dimensions, a drawing or a worn-out sample together with your media, temperature and pressure — our engineering team will come back with the fastest possible quotation and lead time.